Everything about Shaft Mining totally explained
Shaft mining or
Shaft sinking refers to the method of excavating a vertical or near-vertical tunnel from the top down, where there's initially no access to the bottom.
When the top of the excavation is surface it's referred to as a shaft, when the top of the excavation is underground it's called a
winze.
Off-shaft access
The mine shaft is used to access to an underground
mining facility. Horizontal workings off the shaft are called drifts, galleries or levels. These extend from the central shaft towards the ore body. The point of contact between these levels and the shaft itself is known as the inset, shaft station or plat.
Surface facilities
On the surface above the shaft stands a building known as the headframe (or
winding tower, poppet head or pit head). Depending on the type of hoist used the top of the headframe will either house a hoist motor or a
sheave wheel (with the hoist motor mounted on the ground).
The headframe will also contain bins for storing ore being transferred to the processing facility. If the shaft is used for mine ventilaton a plenum or casing, is incorporated into the headframe to ensure the proper flow of air into and out of the mine.
Shaft lining
In North and South America, smaller shafts are designed to be rectangular with timber supports. Larger shafts are round and are concrete lined.
Shaft compartments
A mine shaft is split into multiple compartments. The largest compartment is used for the cage, a conveyance used for moving workers and supplies below the surface. It functions in a similar manner to an
elevator. The second compartment is the skip, used to transport
ore to the surface. Smaller mining operations use a skip mounted underneath the cage, rather than a separate device. The third compartment is used for an emergency exit; it may house an auxiliary cage or a system of
ladders. An additional compartment houses mine services such as
high voltage cables and pipes for transfer of
water,
compressed air or
diesel fuel.
Further Information
Get more info on 'Shaft Mining'.
|
External Link Exchanges
Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:
<a href="http://shaft_mining.totallyexplained.com">Shaft mining Totally Explained</a>
Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned. |
